eMMC Duplicator

IPM-1DX(support 8 bit)



이전 문서

다음 문서


+ - Up Down Comment Print
인터페이스 MMC Ver. 4.3/4.4/4.41/4.5 호환 eMMC 지원
타겟 수 1:8
소비전력 110W
제어방식 LCD Display 및 컨트롤 버튼
크기(㎜) - -


  Model : IPM-1DX
* 1x Master + 8x Target Independent e-MMC/eMCP sockets.

* Supports e-MMC BOOT-1/2, General Purpose-1/2/3/4, and User Data Area Partitions as well as EXT_CSD register settings copy and verify operation.

* Supports MMCA 5.0 compatible e-MMC/eMCP devices.

* Supports e-MMC 8-bit mode working.

* Supports SDR50 bus speed.

* Copy/Verification operation in Partition / Auto / File / Mirror / User / AutoScan mode.

* On-the-fly checksum generation during verify operation.

* Provides EXT_CSD setting checksum info.

* Supports enabling SANITIZE register setting function for MMCA 4.5 e-MMC.

* Supports boot re-size function with e-MMC equipped with boot re-size function.

* Supports “User Data Only” function; allows mix-up e-MMC operation when valid data is located only in user data area.

* 2x RS232 interface for industrial platform connection.

* Replaceable e-MMC / eMCP device socket module is available.

* Equipped with 1 MicroSD card socket module for firmware update requirement.

* Special designed and strong mechanical jig tool for long time working and easy opening/closing all sockets simultaneously.

● Made in Taiwan.


Designed by hikaru100

나눔글꼴 설치 안내

이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소